NEC VERSAPRO VG User Manual page 11

<For Windows 7>
®
• The Intel WiDi adapter must support connection with the PC running on the WiDi
5.1 system. For details, consult the adapter manufacturer.
• If the computer is connected to an external display or TV set using Intel
if the screen output is switched to the LCD display of this computer only, nothing
is displayed on the external display or TV set. However, Intel
use the CPU and wireless LAN function. If you do not need to display the screen
on the external display or TV set using Intel
• If the computer is connected to an external display or TV set using Intel
computer does not automatically switch to the Sleep or Hibernate. In addition,
even if the screen is set to be darkened, the brightness setting of the connected
external display or TV set is not changed.
• From the WiDi [Optimize for interactive use] optional setting, you can select the
Response Speed Prefer mode ([Prioritize speed]). However, if you select this
mode, the HDCP is disabled and the copyright protected contents such as DVDs
cannot be played back on the external display or TV set.
<For Windows 8.1>
• If the computer is connected to an external display or TV set using Intel
if the screen output is changed to the LCD display of this computer only, the WiDi
connection is terminated.
Connection to external display or TV set
Connect the computer to an external display or TV set using Intel
the procedure described below.
<For Windows 8.1>
1
®
Attach the Intel WiDi adapter to an external display or TV set.
2
Prepare the display so that the Intel
®
Intel WiDi adapter manual
3
Display the Charm bar, and click [Devices].
4
Click [Project].
5
Click [Add a wireless display].
6
When the connected device is detected, click the device name.
7
If the WPS PIN input screen appears, enter the 8-digit security code that is
shown on the TV set or external display, and click [Next].
Enter the 8-digit security code after enabling the use of single-byte alphanumeric
characters by selecting it from [Single/Dual/Kanji].
®
WiDi and
®
WiDi continues to
®
WiDi, terminate this connection.
®
WiDi, the
®
WiDi and
®
WiDi by following
®
WiDi standby screen appears.
<For Windows 7>
1
®
Attach the Intel WiDi adapter to an external display or TV set.
2
Prepare the display so that the Intel
®
Intel WiDi adapter manual
3
Click [Start]  [All Programs]  [Intel(R) WiDi].
®
The "INTEL WiDi Software License Agreement" is displayed only when the
computer is initially started. Check the agreement carefully, and click [I agree]
®
button. The Intel WiDi screen appears.
If the [Problem with selected application. Close the application and restart or refer to
the general solution using Intel(R) WiDi Help] or [WiDi application stopped working]
message appears, exit the program. Wait for a while, and then restart Intel
4
When the [Select a wireless display to connect to] screen appears, click
the adapter to be connected.
When you connect the adapter for the first time, go to step 5. If you use the
adapter that you have connected before, the connection procedure is
completed.
While the [Scanning] message is displayed, do not click the adapter on this screen even
when the adapter is detected. If nothing is detected, click the [Scan] button several times
to update the display.
5
When the PIN code input screen appears, enter the (4-digit numeric or 8-
digit) security code that is shown on the screen of the external display or
TV set, and click [Continue].
The connection will be established, and the screen of this computer will be
shown on the external display or TV set.
Disconnection from external display or TV set
Disconnect the computer from the external display or TV set by following the step
described below.
<For Windows 8.1>
1
Repeat steps 1 to 4 of "Connect the computer to the external display or TV
set" section. Click [Disconnect] on the menu that is displayed.
<For Windows 7>
1
Click [Disconnect] on the [Intel
®
WiDi standby screen appears.
®
®
WiDi] screen.
WiDi.
11