NEC VERSAPRO VG User Manual page 21

1
Connect the "recovery drive" you have created to the USB port of the
computer.
2
Turn the power on and immediately press <F2> key several times.
The BIOS setup utility will then be started.
3
Select the startup device from [Boot Override] option using <> or <> key,
and press <Enter>.
If the desired device is not listed on the [Boot Override] menu, press <F10> and check
to see that [Yes] is selected. Then, press <Enter>, restart the BIOS setup utility, and
select the desired device.
The [Boot Override] is contained in the [Exit] option.
4
When [Choose your keyboard layout] is displayed, select [US].
The [Enter the recovery key to return to the enabled state] screen may appear. If this
happens, enter the recovery key and proceed to the next step.
If you do not have the recovery key, you can obtain it by following one of the procedures
described below.
• Access the URL that is shown under the input field.
• Abort the recovery. To do so, tap [Skip this drive] and [Proceed] in sequence. Then,
display the Charm bar on the desktop, and tap [Setting]

[System and Security] [Back up your recovery key] of [BitLocker Drive
Encryption] in this sequence.
5
When [Choose an option] is displayed, select [Troubleshooting].
Message [Troubleshooting] appears.
6
Select a recovery method.
<For refreshing>
Select [Refresh your PC].
<For reset>
Select [Reset your PC].
Follow the steps on the screen for the procedure.
When you have refreshed your computer, reinstall the deleted applications. Now, the
system has been recovered.
Note that "Battery tool" may not operate normally if you have refreshed your
computer. Please use the following steps to change your settings.
1
2
3
4
5
If you have reset the computer, proceed to "Windows Setup" (p.22).
Computer recovery is performed.
There are two recovery options: "Recovery from SSD" and "Recovery from DVD".
SSD Recovery
 
[Control Panel]
1
2
3
4
5
6
When the [User Account Control] screen appears, click [Yes].
Click at lower left of the start screen.
Click [File Explorer].
Open [C:\Program Files\NECBatt\] file.
Double-click [instnbw] or [instnbw.exe] file.
Restart the Windows system.
Computer recovery (Windows 7)
• Be sure to start operations with the computer's power turned OFF.
• Recovery cannot be performed via battery power. Please be sure to connect the AC
adapter and connect the power cord to the AC outlet.
Turn the power on and immediately press <F2> key several times.
The BIOS setup utility will then be started.
When the BIOS setup utility is displayed, press the <F9> key.
Confirm that [Yes] is selected and then press <Enter>.
Press the <F10> key.
Confirm that [Yes] is selected and then press <Enter>.
If Windows 7 has started after Steps 1 to 5, repeat Steps 1 to 5 again.
When the system is restarted, repeatedly click <F11> until message
[Windows is loading files...] appears.
If you do not press the <F11> key at the right time, recovery will not start. If the normal
Windows Desktop screen is shown instead of the recovery screen, turn the power OFF,
start from step 1 and press <F11> in a different timing on step 2.
21