NEC VERSAPRO VG User Manual page 20

6
From the [Boot Override] option, select the optical drive using <> or <> key,
and press <Enter>.
If the desired device is not listed on the [Boot Override] menu, press <F10> and check
to see that [Yes] is selected. Then, press <Enter>, restart the BIOS setup utility, and
select the desired device.
The [Boot Override] is contained in the [Exit] option.
7
When the [Windows Recovery] screen is displayed, select [Start to restore
your computer].
8
If a recovery caution message appears again, read the message carefully
and select [Next].
Follow the steps on the screen for the procedure.
Go to "Windows Setup" (p.22).
Using the Windows function
Recover the computer using the Windows function.
The subsequent procedure differs depending on whether or not the computer can
start up.
If the computer can start up, go to the next "If the computer starts up" section.
If the computer cannot start up, go to the "If the computer does not start up" section
(p.20).
If the computer starts up
If the computer starts up, you can recover the computer using the "Refresh" or
"Reset" function on the system.
•Refresh
Although the personal files, accounts, private setup, and Windows Store
applications are all maintained, the Windows OS will be reset to the factory default
settings.
All applications (Windows Store applications) that the customer has installed are
deleted. After refreshing, the list of the deleted applications is saved on the desktop.
•Reset
All files including personal files and Windows Store applications will be deleted. The
computer will be reset to the initial (default) status.
If you have created multiple partitions, you can delete all personal files by selecting
"Only the drive where Windows is installed" or "All drives". Also, you can select "Just
20
remove my files" to delete personal files only, or "Fully clean the drive" to clean up the
drives and disable them in order to easily complete the recovery operation and
enhance security.
If the PC is reset, the BitLocker drive encryption becomes invalid.
Carry out the following steps using the "Administrator" account.
1
Display the charm bar, and click [Settings].
2
Click [Change PC settings].
3
Click [Update and recovery].
4
Click [Recovery].
5
Select a recovery method.
<For refreshing>
Click [Get started] on the [Refresh your PC without affecting your files] option.
<For resetting>
Click [Get started] on the [Remove everything and reinstall Windows] option.
Follow the on-screen instructions for the procedure.
After refreshing, reinstall the deleted applications. The computer will have now been
recovered. Note that "Battery tool" may not operate normally if you have refreshed
your computer. Please use the following steps to change your settings.
When the [User Account Control] screen appears, click [Yes].
1
Click at lower left of the start screen.
2
Click [File Explorer].
3
Open [C:\Program Files\NECBatt\] file.
4
Double-click [instnbw] or [instnbw.exe] file.
5
Restart the Windows system.
After resetting, continue to "Windows Setup" (p.22).
If the computer does not start up
If the system does not start up, you can recover the system by starting it from the
"recovery drive".
For creation of "recovery drive," please refer to "Creating a recovery drive (Windows
8.1)" (p.24).