NEC VERSAPRO VG User Manual page 13

For Windows 7
Turning the wireless LAN on and off with the wireless switch (<Fn> + <F2>)
You can turn the wireless LAN function on and off by pressing the <Fn> + <F2>
keys on the keyboard.
Turning the wireless LAN on and off through [Wireless Network Connection]
The wireless LAN can be turned on and off by going to the [Control Panel], clicking
[Network and Internet], and selecting [Change adapter settings] under [Network
and Sharing Center]. For more detailed information, please refer to Windows help.
Configuring the wireless LAN
• The wireless LAN functionality can be configured with the [Power Management] tab
in Driver properties.
• When settings are at the factory default values, only 2.4 GHz can be used. When
using 5 GHz, please refer to the following procedure for configuration.
From the [Device Manager], select [Network adapters] and double-click [Intel(R)
Dual Band Wireless-AC 7265].
Next, click the [Advanced] tab, select [Wireless Mode] of [Property], select [6.
802.11a/b/g] in the [Value] column, and click [OK]. When you have completed the
setup process, restart the computer.
Configuring the wireless LAN
The following explanation is for connecting to a wireless LAN access point that
broadcasts its network name (SSID).
For information about other connection methods, please refer to Windows help.
1
Confirm that your computer's wireless LAN function is turned on.
2
Follow the steps below.
<For Windows 8.1>
1
Click the Network icon in the task bar notification area.
A list of network names (SSID) and signal state should come up.
<For Windows 7>
1
Go to the [Control Panel] and click [Network and Internet]  [Network
and Sharing Center].
2
Click [Connect to a network] under [Change your networking settings].
A list of network names (SSID) should come up.
3
Click on the network name (SSID) of the wireless LAN access point that
you would like to connect to.
4
Click [Connect] after confirming that the [Connect automatically] checkbox
is selected.
The automatic connection settings can be changed any time when desired.
5
If a window comes up asking for a [Security key], enter the security key of
the network you are connecting to and click [OK] to continue.
Follow the on-screen instructions for the procedure.
Configuration is now complete.
13