Recovery - NEC VERSAPRO VG User Manual

6
From the [Boot Override] option, select the optical drive using <> or <> key,
and press <Enter>.
The [Boot Override] is contained in the [Exit] option.
7
When [Press any key to boot from CD or DVD...] is displayed, press <Enter>.
If it is not displayed, go to Step 8.
8
When the [Windows Recovery] screen is displayed, select [Erase data on
the hard disk], and press <Enter>.
9
Select the SSD for data deletion and click [Next].
10
Select a data deletion method, and click [OK].
11
When [Starting to erase HDD data. Is it ok? Caution: After HDD data has been
erased, the data on HDD can not revive.] is displayed, click [Yes].
If the data deletion process is interrupted, turn on the power using the "Recovery Disc
1" inserted in the optical drive. It will automatically resume from where it stopped.
12
When [Completed.] is displayed, click [OK].
13
Remove "Recovery Disc 1" from the optical drive and click [Exit Recovery].
14
When [Recovery will be exited. Are you sure to continue?] is displayed, click
[Yes].
Following the above steps will complete data deletion on the SSD.
18
13

Recovery

Recovery Basics
Here we will explain the basics before recovery. Please read this before performing
recovery.
Required Materials
When recovering from a DVD, the following materials are required. Prepare all of the
materials before starting the process.
• Recovery Disc 1
• Recovery Disc 2
• Optical Drive
The Recovery Disc is not included with model VC22T/GG-L.
Backup Data from the SSD
Before recovery, if there is data that you would like to maintain, make a backup of
the data and then perform recovery.
For multi-user computers, each user should logon and make personal backups.
Maintain System Settings
Once recovery is performed, all the settings including system configuration will be
reset to the factory default settings. If you would like to use the current settings again
after recovery, such as BIOS setup utility settings and network settings, make a note of
the current settings.
Returning the BIOS Utility Settings to the Original Values
Before recovery, please be sure to load the factory default settings for the BIOS
setup utility.