C842, C842i, C846, C846i Upright and Recumbent Cycle
Required Tools and Equipment
The following is a summary of the tools and equipment that may be required when you service a
Precor C842, C842i, C846 or C846i Upright or Recumbent Cycle.
Tools
Phillip and flat-head screwdrivers
Standard and metric allen wrench set
Open-end wrench set
Socket wrench set
Chip puller
Rubber mallet
Snap ring pliers
Torque wrench
Pry bar
20030-119 secondary sheave tool
32 mm deep well socket
Equipment
Anti-static kit
Digital multimeter
Supplies
Cable ties
Page 4