Table of Contents
Advertisement
SMS to a PABX
u
You can only receive an SMS when call-
ing line identification presentation
(page 14) is forwarded to the extension
of the PABX (CLIP). The CLIP of the
phone number for the SMS centre is
evaluated in your Gigaset.
u
Depending on your PABX, you may
have to add the access code (external
line prefix) before the number of the
SMS centre.
If in doubt, test your PABX, for example
by sending an SMS to your own phone
number: once with the access code and
once without.
u
When you send SMS messages, your
sender number may be sent without
your extension number. In this case the
recipient cannot reply to you directly.
Sending and receiving SMS on ISDN
PABXs is only possible via the MSN
number assigned to your base station.
Activating/deactivating the SMS
function
When you switch off you cannot send or
receive any further SMS text messages
with your phone.
Settings you have made for sending and
receiving text messages (the numbers of
SMS centres) and any entries in the incom-
ing message and draft message lists will
be retained even after the function is
deactivated.
¢
L N O 2 L
§Menu§
digits: Q= Deactivate the SMS
function; 1 = Activate the SMS
function (default status)
SMS troubleshooting
Error codes when sending
If an SMS cannot be sent for a longer
period of time, it is moved to the incoming
message list and given the status Err. XX.
¢
Enter
¢
§OK§
E0 Calling line identification permanently
withheld (CLIR) or calling line identifica-
tion presentation not activated.
FE Error occurred during SMS transfer.
FD Connection to SMS centre failed, see self-
help.
SMS (text messages)
25
Advertisement
Table of Contents
Troubleshooting
