Sms On A Pabx; Activating/Deactivating The Sms Function - Siemens Gigaset SL370 Owner's Manual

SMS (text messages)
~
If necessary, enter code, desig-
nation and destination
number.
Press the display key.
§Save§
Editing the entry of an info service
¤
Select the info service (see above).
Then:
Opening menu.
§Options§
Select and press
Edit Entry
~
If necessary, change the code,
designation, or destination
number.
Press the display key.
§Save§
Deleting an info service
¤
Select the info service (see above).
Then:
Open menu.
Options§
Select and press
Delete Entry

SMS on a PABX

u
You can only receive a SMS when the
Calling Line Identification is for-
warded to the extension of the PABX
(CLIP). The CLIP of the phone number
for the SMS centre is evaluated in your
Gigaset.
u
If required, you must prefix the number
for the SMS centre with the access code
(depending on your PABX).
If in doubt, test your PABX, e.g. by
sending a SMS to your own number,
once with and once without the access
code.
u
When you send SMS messages, your
sender number may be sent without
your extension number. In this case the
recipient cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base station.
34
.
§OK§
.
§OK§
Activating/deactivating the
SMS function
If you deactivate the SMS function, you
cannot send or receive any SMS messages
with your phone.
The settings which you have made for
sending and receiving SMS messages
(e.g. the call numbers of the SMS centres)
and the entries in the incoming and draft
message lists are saved even after you
switch off your phone.
w
Open menu.
N 5 O 2 L
Enter the digits.
Q
Deactivate SMS function.
§OK§
Or:
Activate SMS function (default
§OK§
setting).