Service Booklet; Installation Inspection - Jula 416-085 Operating Instructions Manual

Congratulations on your new heat pump! You have selected a product that will provide you with wonderful
warmth at a low cost over the coming years. Your dealer or installer must carry out an installation
inspection and sign the inspection report when the unit is installed. Inspections, maintenance and service
must be carried out regularly to ensure the long life and full benefits of the heat pump. Your local dealer
can perform or provide this service.
The first service must be performed within a year of installation. Thereafter, service must be carried out
when necessary, but at least every two years. Service work may only be performed by authorised
personnel. The following must be checked:
• Function.
• Measuring over and under-pressure.
• Measuring outdoor temperature and water temperature.
• Cleaning the filter.
• Cleaning the evaporator.
Good luck!

Installation inspection

Model:
Leak test of cooling circuit:
Leak test of water circuit:
Bleeding of water circuit:
Function test:
Set water temperature:
Set temp. room sensor:
Temperature outside:
Temperature of water in:
Temperature of water out:
The unit is supplied and function tested.
Dealer:
__________________________
ENGLISH

SERVICE BOOKLET

Ok. Fail
°C
°C Min.
°C
°C
°C
Next service:
Date, signature:
118
Serial no.: _____________________
Specify fault
_____________________________
_____________________________
_____________________________
_____________________________
Setting circulation pump:
Medium
_____________________
___________________
Max