Marking
Explanation
HP
Indoor unit air/water heat pump
WE
Water tank (5-10 litres)
AAV
Automatic venting valve
OWT
Water tank (> 30 litres)
WT
Water heater
TW
Flow valve
PBV
Relief valve
FH
Underfloor heating
RA
Radiator
HE
Heat exchanger
MFV
Manifolds
ET
Electric heater
A.
This installation is suitable if you only use domestic hot water.
B.
This requires the installation of a small water tank, OWT, to prevent the heat pump starting and
stopping.
C.
This installation is directly on a hydronic system without accumulator tank and contains manifolds
that control underfloor heating, radiators, etc.
In general, hydronic systems must always be bled thoroughly before commissioning.
ENGLISH
CONNECTION DRAWINGS
127