Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Belling SCGHU60GC
Summary of Contents for Belling SCGHU60GC
- Page 1 Users Guide & Installation Handbook Belling Gas Hobs UK 1.364 082761106 27/11/2014...
- Page 2 CONTENTS & INTRODUCTION CONTENTS WARRANTY • SAFETY Your new appliance comes with our • USING THE PRODUCT 12-month guarantee, protecting you against electrical and mechanical • CLEANING breakdown. To register your appliance please call 0844 481 0182, complete • INSTALLATION INSTRUCTIONS the registration form included or register •...
- Page 3 CONTENTS & INTRODUCTION Our policy is one of constant development and improvement, therefore we cannot guarantee the strict accuracy of all of our illustrations and specifications - changes may have been made subsequent to publishing. GAS WARNING If you smell gas: Do not try to light any appliance. Do not touch any electrical switch.
- Page 4 SAFETY involved. Children BEFORE USING THE PRODUCT shall not play with the Make sure that you have removed all packaging and wrapping. Some of the appliance. Cleaning and items inside this appliance may have ad- ditional wrapping. user maintenance shall not be made by children GENERAL WARNING! - The...
- Page 5 SAFETY appliance must never operate the appliance be disconnected from without the glass panel the mains supply during correctly fitted. use, as this will seriously WARNING! - There is affect the safety and a risk of electric shock, performance, particularly so always make sure in relation to surface you have turned off temperatures becoming...
- Page 6 SAFETY GAS WARNING! - Prolonged intensive use of the appliance may call If you smell gas: for additional ventilation, Do not try to light any for example opening appliance. of a window, or more Do not touch any effective ventilation, electrical switch. for example increasing Contact your local gas the level of mechanical supplier immediately.
-
Page 7: Packaging Material
SAFETY aids, or heat diffusers, as they create gers in your kitchen. excessive heat and can damage the • Never fill a chip pan (or other deep- surface of the hob. fat fryer) more than one-third full of • Never use the hob for any other purpose than cooking food. Do not use a fire extinguisher on a pan •... - Page 8 SAFETY waste disposal service or the retailer where you purchased the product. Avoiding damage to the appliance. Objects that melt and things that boil over can burn onto the hob and should be removed as soon as possible. To avoid damage to cookware do not al- low sauce pans or frying pans to boil dry.
- Page 9 USING THE HOB - GAS • If your hob is supplied with left and • To simmer, turn the control knob right handed pan supports, ensure to the small flame symbol. This will that they are located over the align- ensure that the flame is just large ment pins and are sitting flat on the enough to gently heat the contents of hob.
- Page 10 USING THE HOB - GAS FOLD DOWN LID (IF FITTED) WOK RING (IF SUPPLIED) Caution: Glass lids may shatter when The wok ring should only be used heated. Turn off all the burners before with a wok. No other style of pan is shutting the lid.
- Page 11 CLEANING General as they can contain salts, which will damage the metal. • It is important to clean the product regularly as a build up of fat can af- Enamel surfaces & parts fect its performance or damage it and may invalidate your guarantee.
- Page 12 CLEANING GAS HOB Cast iron griddle or pan supports (if fitted) Burner caps and heads • Ensure the griddle has fully cooled • The slots in the burner head where and scrape off any stubborn marks the flames burn should be cleared of and bits of food with a plastic or deposits.
- Page 13 INSTALLATION Installation In the UK the regulations and stan- dards are as follows (inclusive of This appliance must be installed in accor- successive issues: dance with the regulations in force, and only in a well ventilated space. Read the 1. Gas Safety Regulations (Installation and instructions before using or installing this Use).
-
Page 14: Ventilation Requirements
INSTALLATION ABOVE AN OVEN INSTALLATION Worktop Installation above a unit with a • Windows and permanent vents should drawer or door therefore not be blocked or removed with- out first consulting a competent engineer. 25mm The base of the appliance must be pro- tected from damage e.g. drawers may LP Gas only - Do not install this appliance Oven only be installed providing a partition in a room below ground level. - Page 15 INSTALLATION Clearances & dimensions Extractor or cooker hoods should only be fitted above the hob in accordance with The room should have good light and the manufacturer’s instructions. ventilation but be free from draughts. No combustible materials or flammable The work top should be at least 600mm liquids should be stored below the hob. deep, &...
-
Page 16: Important Information
INSTALLATION Important Information There are two ways to install the clamps, depending on the thickness of the work It is important when installing front con- top. Please measure the thickness of trol gas hobs, that the work top cut out is your work top and ensure that the cor- the same as is quoted in this installation rect method is used. - Page 17 INSTALLATION can be dealt with as follows: Alternative clamp positions Cabinet sides If the front and rear clamp positions are problematic, alternative positions can be If the hob is to be installed across the top used on the sides of the hob, dependant of two cabinet housing units, then the on the particular installation.
- Page 18 INSTALLATION Connect gas hob to gas supply Connect to the electricity supply The inlet is at the rear right hand side of Unless this appliance is supplied with a the hob. fitted plug, it must be connected by a competent person, using fixed wiring via The hob may be connected to the gas a double pole switched fused spur outlet, supply either by rigid pipe work or flexible with a contact separation of 3mm at all...
-
Page 19: Troubleshooting
INSTALLATION (Live), or coloured Red. Connect to the electricity supply The plug and socket must be accessible after installation. Should the mains lead For hobs that are supplied/manufactured of the appliance ever require replacing, with a 13Amp supply cord and plug only. we recommend that this is carried out by a qualified electrician who will replace it Warning: Ensure that the power rating of... -
Page 20: Technical Data
TECHNICAL DATA This information is for the following Appliance Class appliances: Class 3 Bulit-In Hotplate Belling Hobs SCGHU60GC / SCGHU70GC Gas pressure settings - NG only G20 Natural Gas @ 20 mbar Data badge Underside of the hob base Countries of destination... - Page 21 CUSTOMER CARE CUSTOMER CARE WEB SHOP range of Bake ware and Cookware essen- tials including Roasting Pans, Cake Tins Having purchased a superior cooker, hob and Non-Stick Cooking Liners. or hood from us, you’ll naturally want to keep it looking great. And who better to For all enquires, please visit our Web Shop at www.gdhaonline.co.uk or help you care for it than the manufac-...
- Page 22 Please keep this handbook for future reference, or for anyone else who may use the appliance.
- Page 23 Please keep this handbook for future reference, or for anyone else who may use the appliance.
- Page 24 CUSTOMER CARE To contact Belling about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3746 in case of difficulty within the UK Alternatively general, spares and service information is available from our website at www.belling.co.uk Please ensure that you have the product’s model no and serial no available when you call. These can be found on the silver data label on your product which is located:...