Advertisement
Advertisement
Table of Contents
Related Manuals for Belling shu60
Summary of Contents for Belling shu60
- Page 1 Users Guide & Installation Handbook Belling Side Control Electric Hobs...
- Page 2 Contents Introduction ..........4 Using the hob.
- Page 3 Alternatively, you can register, and apply for extended warranty on line at: www.belling.co.uk If your appliance is covered by the warranty and guarantee, you will not be billed for work undertak- en should your appliance be faulty, terms and conditions do apply, so please read through the litera- ture carefully.
-
Page 4: Using The Hob
Introduction Keep all flammable materials (such as curtains, clothing & furnishings) away from the hob. This hob is intended to be built into a domestic kitchen. This Do not let pans overhang the control knobs, as this product is designed as a domestic cooking appliance for may overheat and damage them. - Page 5 Care & Cleaning short period, without a pan, to harden and burn off the coating. Use a medium - high setting for 3 - 5 minutes. A Caution: Any cleaning agent used incorrectly non-toxic smoke may occur during this process. Allow hot- may damage the hob.
- Page 6 Installation Important: Make sure the electric supply is switched off before connection is made. Clearances & dimensions The room should have good light and ventilation but be free Secure hob to worktop from draughts. Place the hob in the cutout and secure in place using the The worktop should be at least 600mm deep, &...
-
Page 7: Technical Data
Installation advice - cabinetry Make sure the supply is switched off before connection is made. Warning: This electric hob must be earthed. Dealing with sides, cross-rails & back-panels in cabinetry Depending on the cabinets, the worktop thickness & the hob positioning, it is possible for Technical Data the hob base and/or the clamp brackets to interfere with parts of the cabinet.
Need help?
Do you have a question about the shu60 and is the answer not in the manual?
Questions and answers