Olivetti d-COPIA 3013MFplus Operation Manual page 456

Characters associated with different keys can be entered consecutively. To enter a character associated with the
same key after another, use cursor keys to move the cursor to the next entry position before entering it.
If you use cursor keys to move the cursor to an entry position apart from the end of the line and enter a character
there, spaces are automatically entered in between.
Entering Symbols
Symbols:
Entry When [Select Character] Is Selected in Login Operation Settings
In the login screen that appears when user management is enabled, the character entry method may vary depending
on the settings. (Refer to Login Operation on page 8-73.)
Login User Name: a b
Morgan*
*abcdefghijklmnopqrst
uvwxyzABCDEFGHIJKLMNO
a b
[ Text ]
NOTE:
[ Next ]
numeric keys.
Appendix-8
Press [Text] (the Right Select key) or # on the numeric
keys to display the Symbols screen. Use cursor keys to
select the symbol you want to enter and then press the
OK key.
If a character palette appears on the screen, use cursor
keys to select the desired character from the displayed
characters, and then press the OK key to enter it.
Numerals can be entered directly by pressing