Olivetti d-COPIA 3013MFplus Operation Manual page 352

Auto-IP Settings
Select whether or not to use Auto-IP. The default setting is On.
Use the procedure below to specify the Auto-IP setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3 System/Network
*********************
Login User Name:
*******************
Login Password:
System/Network:
1 Network Setting
*********************
2 I/F Block Set.
3
Security Level
Network Setting: a b
1 TCP/IP Setting
*********************
2 WSD-SCAN
3
WSD-PRINT
TCP/IP Settings: a b
1 TCP/IP
*********************
2 IPv4 Setting
3
IPv6 Setting
1
[ Exit ]
L b
[ Login ]
2
a b
[ Exit ]
3
4
5
6
[ Exit ]
7
8-144
In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
The System/Network menu appears.
Press the  or  key to select [Network Setting].
Press the OK key. The Network Setting menu appears.
Press the  or  key to select [TCP/IP Settings].
Press the OK key. The TCP/IP Settings menu appears.
Press the  or  key to select [TCP/IP].
Default Setting (System Menu)