Olivetti d-COPIA 3013MFplus Operation Manual page 370

POP3 Security
Select the communication protocol according to the type of security employed by the POP3 server. The default setting
is Off.
NOTE:
POP3 (E-mail RX) must be set to On in Protocol Detail on page 8-151.
The table below shows the available settings.
Item
Off
SSL/TLS
STARTTLS
* You can change the port number using Embedded Web Server RX.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1 Report
2
Counter
3
System/Network
*********************
Login User Name: L b
*******************
Login Password:
System/Network:
1
Network Setting
*********************
2
I/F Block Set.
3 Security Level
Network Setting: a b
5
Secure Protocol
*********************
6
Host Name
7 LAN Interface
Do not use security employed by the POP3 server.
Encryption is applied any data communication. To enable POP3 security, the
POP3 port may have to be changed according to the server settings.
Typically, 995* for SSL/TLS is well-known POP3 port.
Encryption is applied any data communication. Typically, 110* for STARTTLS
is well-known POP3 port.
1
[ Exit ]
[ Login ]
2
a b
[ Exit ]
3
4
[ Exit ]
8-162
Description
In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
The System/Network menu appears.
Press the  or  key to select [Network Setting].
Press the OK key. The Network Setting menu appears.
Default Setting (System Menu)