Olivetti d-COPIA 3013MFplus Operation Manual page 216

The table below lists the sizes that can be registered.
Inch models
Metric models
Use the procedure below to set a custom original size.
Sys. Menu/Count.: a b
3
System/Network
4 User/Job Account
5
Common Settings
*********************
Common Settings: a b
1 Language
*********************
2 Default Screen
3
Sound
Orig./Paper Set.: a b
1 Custom Orig.Size
*********************
2 Def. Orig. Size
3
Custom PaperSize
Size Entry(Y):
Size Entry(X):
Input units
X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
[ Exit
[ Exit
[ Exit
L b
(1.97 - 8.50)
x ***8.50*"
L b
(1.97 - 14.02)
J **14.02*"
Dimensions
1
In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
]
2
Press the OK key. The Common Settings menu appears.
3
Press the  or  key to select [Orig./Paper Set.].
]
4
Press the OK key. The Orig./Paper Set. menu appears.
5
Press the  or  key to select [Custom Orig.Size].
]
6
Press the OK key. Size Entry(Y) appears.
7
Use the numeric keys to enter the paper length (Y).
8
Press the OK key. Size Entry(X) appears.
9
Use the numeric keys to enter the paper width (X).
10
Press the OK key. Completed. is displayed and the
screen returns to the Orig./Paper Set. menu.
8-8
Default Setting (System Menu)