Olivetti d-COPIA 3013MFplus Operation Manual page 309

Use the procedure below to set Select Key Set.
Sys. Menu/Count.:a b
6
Copy
7
Printer
8 Send
*********************
Send:
1 Select Key Set.
*********************
2
DestinationCheck
3 Default Screen
Select Key Set.: a b
1 Left
*********************
2 Right
Left:
\
Density
*Duplex
*********************
FTP Encrypted TX
This function is
already registered.
1
In the Sys. Menu/Count. menu, press the  or  key to
select [Send].
[ Exit ]
2
Press the OK key. The Send menu appears.
a b
[ Exit ]
3
Press the  or  key to select [Select Key Set.].
4
Press the OK key. Select Key Set. appears.
[ Exit ]
5
Press the  or  key to select [Left] or [Right].
6
Press the OK key. This displays the function selection
a b
screen for the flexible key selected in step 5. The screen
shown is the one when [Left] is selected.
7
Press the  or  key to select the function you want to
register to the flexible key.
8
Press the OK key. Completed. is displayed and the
screen returns to the Send menu.
IMPORTANT: If you try to set the function that is registered
to the other flexible key, you cannot set it and This function is
already registered. is displayed.
8-101
Default Setting (System Menu)
8