Sleep Timer:
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.
NOTE:
Refer to page 8-45 for the default settings.
•
Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto panel reset setting. The default setting is On.
Sys. Menu/Count.: a b
3
System/Network
4
User/Job Account
5
Common Settings
*********************
Common Settings: a b
1
Language
*********************
2
Default Screen
3
Sound
Login User Name:
*******************
Login Password:
M b
(1 - 240)
*******1*min.
[ Exit
[ Exit
L b
[ Login
6
Press the OK key. Sleep Timer appears.
7
Press the or key to set the Sleep Timer. Set the
amount of time before entering the sleep state in
minutes. You cannot use the numeric keys to enter this
value.
8
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
1
In the Sys. Menu/Count. menu, press the or key to
select [Common Settings].
]
2
Press the OK key. The Common Settings menu appears.
]
3
Press the or key to select [Timer Setting], and press
the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
]
8-40
Default Setting (System Menu)