Olivetti d-COPIA 3013MFplus Operation Manual page 350

DHCP Settings
Select whether or not to use the DHCP server. The default setting is On.
Use the procedure below to specify the DHCP setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3 System/Network
*********************
Login User Name:
*******************
Login Password:
System/Network:
1 Network Setting
*********************
2 I/F Block Set.
3
Security Level
Network Setting: a b
1 TCP/IP Setting
*********************
2 WSD-SCAN
3
WSD-PRINT
TCP/IP Settings: a b
1 TCP/IP
*********************
2 IPv4 Setting
3
IPv6 Setting
1
[ Exit ]
L b
[ Login ]
2
a b
[ Exit ]
3
4
5
6
[ Exit ]
7
8-142
In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
The System/Network menu appears.
Press the  or  key to select [Network Setting].
Press the OK key. The Network Setting menu appears.
Press the  or  key to select [TCP/IP Settings].
Press the OK key. The TCP/IP Settings menu appears.
Press the  or  key to select [TCP/IP].
Default Setting (System Menu)