Olivetti d-COPIA 3013MFplus Operation Manual page 310

Destination confirmation screen before transmission
You can specify whether or not the destination confirmation screen appears after the Start key is pressed or after a
destination is added or edited before transmission.
The table below shows the available settings.
Check beforeSend
Check New Dest.
Sys. Menu/Count.:a b
6
Copy
7 Printer
8
********************* Send
Send:
1 Select Key Set.
*********************
2 DestinationCheck
3
Default Screen
DestinationCheck:a b
1 Check beforeSend
*********************
2 Check New Dest.
Check beforeSend:a b
********************* 1 *Off
2 On
Item
Specify whether or not the destination
confirmation screen appears before
transmission.
Specify whether or not the destination
confirmation screen appears when the
destination is new.
[ Exit ]
a b
[ Exit ]
[ Exit ]
Detail
1
In the Sys. Menu/Count. menu, press the  or  key to
select [Send].
2
Press the OK key. The Send menu appears.
3
Press the  or  key to select [DestinationCheck].
4
Press the OK key. The destination confirmation menu
appears.
5
Press the  or  key to select [Check beforeSend] or
[Check New Dest.].
6
Press the OK key. The menu of the selected function
appears.
The screen when the Check before Send menu is
selected is shown.
7
Press the  or  key to select the desired function.
8
Press the OK key. Completed. is displayed and the
screen returns to the Send menu.
8-102
Default Setting (System Menu)