Switching The Language For Display [Language] - Olivetti d-COPIA 3013MFplus Operation Manual

Switching the Language for Display [Language]

Select the language displayed on the Message Display.
Use the procedure below to select the language.
Login User Name: L b
********************
Login Password:
Sys. Menu/Count.: a b
3
System/Network
4 User/Job Account
5 Common Settings
*********************
Common Settings: a b
1
********************* Language
2 Default Screen
3
Sound
1
Press the Power switch.
2
Press the System Menu/Counter key on the main unit
operation panel.
When you are performing user management and have
not logged in, a login screen will appear. Then, enter the
user ID and password to log in.
NOTE:
[ Login ]
machine at the factory.
Login User Name:30 ppm model:3000, 35 ppm model:3500
Login Password:30 ppm model:3000, 35 ppm model:3500
Refer to Character Entry Method on Appendix-5 for details
on entering characters.
3
In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
4
Press the OK key. The Common Settings menu appears.
[ Exit ]
5
Press the  or  key to select [Language].
2-9
The following administrator is registered in the
Preparation before Use
2