NEC SL1100 Installation Instructions Manual page 21

3. In the Command Prompt Window, Type ipconfig then Press Enter.
4. Locate the Subnet Mask Number and Write it Down.
SUBNET MASK: ________________________________
5. Locate the Default Gateway Number and Write it Down.
DEFAULT GATEWAY: ___________________________
In the next step you'll need to create two (2) new IP Addresses on your network. The first will be
assigned to the VoIP Card and the second will be reserved for Voice Ports (such as SIP trunks). In
order to create these addresses, you'll first need to see which IP Addresses are currently in use.
IMPORTANT! If you have an IT administrator, it is important to check with
them and ensure that the addresses you create do not interfere with any
others on the current network.
1-888-632-3794 • info@necsl1100distributors.com
SL1100 Installation Instructions
2