Drive Cage - HP EliteDesk 800 G2 Desktop Mini Maintenance And Service Manual

Drive cage

The drive cage is located next to the heat sink. The drive cage is secured with three Phillips screws.
1. Prepare the computer for disassembly
2. Remove the top cover
3. Remove the hard drive
4. Remove the three screws securing the HDD cage to the chassis (1).
5. Pull the hood sensor up and off the HDD cage (2).
6. Lift the HDD cage out of the chassis (3).
To install the drive cage, reverse the removal procedure.
(Preparation for disassembly on page
(Top cover on page 21).
(Hard drive on page 23).
20).
Drive cage 27