Thermal Sensor - HP EliteDesk 800 G2 Desktop Mini Maintenance And Service Manual

Thermal sensor

A thermal sensor installs at the front of the computer near the speaker. Adhesive secures the sensor to the
chassis that houses the speaker.
To remove the thermal sensor:
1. Prepare the computer for disassembly
2. Remove the top cover
3. Remove the hard drive
4. If your model is an EliteDesk 800 or MP9, remove the secondary fan
MP9 models only) on page
5. Remove the drive cage
6. Disconnect the thermal module from the system board (1).
7. Pull to disengage the sensor to the computer chassis (2). The sensor is secured to the chassis with
adhesive.
To install the thermal sensor, reverse the removal procedures.
36 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
(Preparation for disassembly on page
(Top cover on page 21).
(Hard drive on page 23).
26).
(Drive cage on page 27).
20).
(Secondary fan (EliteDesk 800 and