BMW 51 16 0 443 082 Installation Instructions Manual
BMW 51 16 0 443 082 Installation Instructions Manual

BMW 51 16 0 443 082 Installation Instructions Manual

Retrofit cup holder bmw 1 series;

Advertisement

Original BMW Accessories.
Installation Instructions.
Retrofit - Cup holder
BMW 1 Series
These installation instructions apply only to LHD vehicles.
Retrofit kit No.:
51 16 0 443 082
Cup holder
Installation time
The installation time of approx. 1.5 hours may vary depending on the vehicle's condition and equipment.
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies.
In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with
the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and work
instructions, in a rational order, using the specified tools (special tools) and observing current health and safety
regulations.
In the event of installation or functional problems, limit troubleshooting to 0.5 hours for mechanical
jobs and 1.0 hours for electrical jobs.
To avoid unnecessary work and costs, send a corresponding enquiry via the Aftersales Assistance Portal (ASAP)
using the technical parts support application.
Please quote the following:
- Vehicle identification number
- Part number of retrofit kit
- Exact description of the problem
- Work already carried out.
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP!
© BMW AG, Munich
01 29 0 443 078
05/2008
(V/Z)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 51 16 0 443 082 and is the answer not in the manual?

Questions and answers

Summary of Contents for BMW 51 16 0 443 082

  • Page 1 These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies. In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge.
  • Page 2 Trim cover C for the retrofit kit must be ordered separately. Observe colour variant (refer to EPC for part number and instructions). Special tools required 00 9 317, Trim panel wedge © BMW AG, Munich 01 29 0 433 078 05/2008 (V/Z)
  • Page 3 4. Finishing off and coding ................8 © BMW AG, Munich...
  • Page 4: Parts Overview

    1. Parts overview 087 0442 V Legend A Cup holder B Bracket C Trim cover (not included in parts kit) D Screw (2x) E Templates © BMW AG, Munich 01 29 0 433 078 05/2008 (V/Z)
  • Page 5: Preparatory Work

    34 41 ... Clipped trim cover (only E87 before 03/2007) 51 16 221 Centre trim cover for dashboard (only E87 before 03/2007) 51 45 310 Storage compartment 51 16 200 © BMW AG, Munich 01 29 0 433 078 05/2008 (V/Z)
  • Page 6: Installing Cup Holder

    (1) on the underside of centre console (2). Make sure that the cable that may be running through the centre console is not damaged. 087 0446 V 087 0446 V © BMW AG, Munich 01 29 0 433 078 05/2008 (V/Z)
  • Page 7 Fit trim cover C in position and secure with screws D through bracket B. 087 0448 V 087 0448 V Fit cup holder A in trim cover C. 087 0449 V 087 0449 V © BMW AG, Munich 01 29 0 433 078 05/2008 (V/Z)
  • Page 8: Finishing Off And Coding

    4. Finishing off and coding The retrofit system does not require encoding. – Reassemble vehicle in reverse order of removal – Reconnect vehicle battery – Perform quick test © BMW AG, Munich 01 29 0 433 078 05/2008 (V/Z)

Table of Contents