BMW 84 64 0 398 229 Installation Instructions Manual page 2

Installation information
When routing fibre optic cables, make sure the bending radius is no less than 25 mm.
Ensure that the cables/lines are not kinked or damaged as you install them in the car. The costs incurred
as a result of this will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
After the installation work the upgrade must be programmed / coded using SSS (software service
station) via the CIP path.
All the figures show LHD cars, proceed accordingly on RHD cars.
Ordering instructions
The snap-in adapter is not supplied with the upgrade kit and must be ordered separately for the various
telephones (see EPC for part number and documentation).
List of special equipment
The following special equipment must be taken into consideration when installing the upgrade kit:
SA 606 Business navigation system
SA 609 Professional navigation system
SA 663 BMW Professional radio
Special tools required
00 9 317 Trim wedge
© BMW AG, München
01 29 0 401 237
02.2005 (Z/Z) 2