System Menu - Sony SRG-300SE Ipela User Manual

Setting the range of the RIGHT/LEFT movement
–
170°
Setting the range of the UP/DOWN movement
(Eflip: OFF)
+90°
0°
–
20°
Note
When you turn the camera to the right or left beyond the
100° with the camera pointed downward by 20°, the
camera may be caught on the lens, depending on the
zoom position of the lens.
PAN/TILT SLOW (low Pan-Tilt mode)
When this function is set to ON, the active speed of
PAN/TILT will be slow and it is easy to shoot slow-
moving objects.
D-ZOOM (digital zoom)
You can set digital zoom to ON or OFF. When set to
OFF, digital zoom does not operate, and only optical
zoom is available. When set to ON, digital zoom takes
over after optical zoom reaches MAX (×30). Up to
maximum ×360 can be zoomed digitally.
56

SYSTEM Menu

(Eflip: OFF)
CENTER (0°)
+170°
(Eflip: ON)
+20°
–90°
SYSTEM Menu
DISPLAY INFO
When this item is set to ON, the message automatically
appears for about 3 seconds on the external monitor
screen that is connected to the SDI OUT connecter when
you perform the following operations using the remote
controller.
Message
PRESET n OK
0°
"n" is a preset position
number.
RECALL n OK
"n" is a preset position
number.
RESET n OK
"n" is a preset position
number.
ONE PUSH WB:OP
ONE PUSH WB:OK
ONE PUSH WB:NG
Note
These messages are not displayed for the operation via a
network.
Operation using the remote
controller
You have stored the camera
settings to POSITION 1 to 16.
You have read the camera settings
stored in POSITION 1 to 16.
You have reset the camera
settings stored in POSITION 1 to
16.
During the white balance
adjustment in the ONE PUSH
white balance mode, the message
flashes on the screen.
When white balance adjustment
is correctly performed in ONE
PUSH white balance mode, this
message appears on the screen.
If white balance adjustment is
incorrectly performed in ONE
PUSH white balance mode, this
message flashes on the screen.