White Balance Menu; Picture Menu - Sony SRG-300SE Ipela User Manual

WHITE BALANCE Menu

The WHITE BALANCE menu is used to select the
white balance mode.
You can also set via a Web browser.
See "White balance" on page 23.
MODE (white balance mode)
Select the white balance mode from among the
following:
AUTO (auto), IN DOOR (indoor), OUT DOOR
(outdoor), ONE PUSH (one push), ATW, MANUAL
(manual)
When you select MANUAL, R.GAIN (R gain) and
B.GAIN (B gain) appear. You can select each item in the
range from 0 to 255.
When you select the ONE PUSH mode
Perform the following operations.
1
Zoom in on a large white subject in the center of the
screen.
2
Press ONE PUSH AWB button of the remote
controller.
The one-push white balance adjustment is
activated.
When DISPLAY INFO (page 56) is set to ON on the
SYSTEM menu, the result of the white balance
adjustment is displayed on the connected monitor to the
SDI output.
54
WHITE BALANCE Menu / PICTURE Menu

PICTURE Menu

The PICTURE menu is used to set the items related to
the picture.
You can also set via a Web browser.
See "Picture" on page 23 or "Installation Tab" on
page 20.
APERTURE (aperture compensation)
Select the aperture compensation level from among
MIN, 1 to 14 and MAX.
HIGH RESOLUTION (high resolution mode)
You can select ON/OFF of HIGH RESO (high
resolution mode). When set to ON, you can enjoy
emphasized edge and high-resolution images.
Note
When set to ON, the image is noisier than when set to
OFF.
NOISE REDUCTION (noise reduction)
You can enjoy clearer images by removing unnecessary
noise (fixed pattern and randomized noise). You can
select 6 levels from OFF (MIN) to 5 (MAX).
IMAGE STABILIZER (image stabilizer)
You can select the effect of image stabilizer according to
the shooting conditions.
OFF: The image stabilizer function does not operate.
ON: The image stabilizer function operates.
When set to ON, you can obtain steadier images if
vibration is present. This stabilizer is effective for
vibration frequencies around 10 Hz. This function
utilizes digital zoom; therefore, the angle of view and
resolution of images may be affected. However, image
sensitivity is retained.
Notes
• The image stabilizer function is not effective during
pan/tilt operations. It may take some time for the
image to stabilize after stopping pan/tilt operations.
• If the image stabilizer function is enabled, it may take
some time for the image to stabilize after turning on
the power of the camera.