Superimpose Tab - Sony SRG-300SE Ipela User Manual

Notes
• The frame rate or bit rate that is actually transmitted
may be different from the set values depending on
image size, scene, network environment.
• The Adaptive rate control cannot operate when the
Plug-in free viewer is being used.
• If you want to use the Adaptive rate control, set the
connection method in the live viewer to Unicast. If
you set TCP as a connection method, the adaptive rate
control will be disabled. For details, see "Operating
the Camera Via a Network" - "Switching
Transmission Mode" on page 17.
Min, Max
Set the maximum and minimum bit rates that are
adjusted with the adaptive rate mode when Bit rate
compression mode is set to Adaptive rate
control.
Bit rate
When you set Image codec to H.264 and set Bit rate
compression mode to CBR, the bit rate of the image
transmission for a line can be set. When the bit rate is set
to a high level, a high image quality can be enjoyed.
Image quality
If you set Image codec to JPEG, or Bit rate
compression mode to VBR when Image codec is set to
H.264, the image quality setting will be enabled.
Selectable values are from 1 to 10. When 10 is selected,
the best image quality is achieved. Selectable values are
changed depending on the setting.
Maximum bit rate limit
Enable the check box when Bit rate compression mode
is set to VBR, to set the maximum value of the bit rate.
Max: Set the maximum value of the bit rate when the
camera is operated with VBR.
Accept frame skip: If you enable the checkbox, the
frame skip will be allowed for bit rate control.
Bandwidth control
Limits the network bandwidth for the JPEG image data
output from the camera when you set Image codec to
JPEG.
Note
Audio may be interrupted depending on the selected
bandwidth. In this case, select a wider bandwidth. This
function is not available when the setting is set to 0.
OK/Cancel
See "Buttons common to every menu" on page 18.

Superimpose Tab

Select whether or not to superimpose the custom string
and the character of date & time on the image.
Three custom strings and one logo (still image) can be
superimposed simultaneously.
Notes
• For setting the superimposing, set Image size1 in the
Video codec tab of the Video menu to the maximum
rate.
• Deselect the checkbox of Image stabilizer in the
Installation tab of the System menu. After setting
superimpose, set the Image stabilizer function again.
Preview screen
Preview the image, and adjust the superimposed image.
You can move the position of superimposed image
displayed on the preview screen by drag and drop.
Image
Select the video codec mode to set for the superimposed
image.
The setting for the superimposed image is available if
you select the checkbox next to the list box.
For details about the video codec mode, see the Video
codec tab in the Video menu.
Position
Select the number of the display position or logo, on the
preview screen. When Logo is selected, the logo file
setting is displayed.
Note
Permissible logo file specifications;
File format: PNG8 with alpha channel
Image size: 160 × 120 or smaller
Width (pixels): multiples of 16
You can cancel the logo files in the Initialize tab.
When display position number 1, 2 or 3 is selected, the
following setting menus appear.
Setting the Camera Image — Video Menu
25