Table of Contents
Advertisement
LOCK-OFF SWITCH
This tool is equipped with a lock-off switch
that will prevent inadvertent operation of
the tool. Place the lock-off switch (1) in the
middle position to activate (Fig. 1) the lock-
off feature. The lock-off switch should
always be used during the following
situations:
●
Removing a bent or jammed nail
●
When tool is left unattended
ADJUSTING DEPTH-OF-DRIVE
The 4-stage depth-of-drive dial allows the
user to easily select the desired nail drive
depth (Fig. 2).
NOTE: The depth to which the nail is
driven will depend upon two factors:
a)
The longer the nailer is allowed to
hammer, the deeper the nail will be
driven.
b)
With the no-mar tip installed, the nail
depth will be reduced.
Depth Setting Ranges
Position
1
Nail head counter sunk by 1 mm
to raised 1 mm.
2
Nail head flush with the surface
to raised 2 mm.
Nail head raised 3–5 mm above
surface.
3
Suitable for hanging heavy
objects.
Nail head raised 8–10 mm above
surface.
4
Suitable for hanging lighter
objects.
To set the nail depth, press dial inward (1)
and rotate it to the desired position (Fig. 3).
ASSEMBLY AND OPERATION
Depth range
12
Fig. 1
Fig. 2
Fig. 3
Hide quick links:
Advertisement
Table of Contents
