OPERATION WITH MENU SETTINGS
Press Menu button to navigate through the Menu settings. Voice Assisted Operation feature is available on
selected models. At any time in Menu mode, short press PTT or wait 3 seconds to exit the menu.
HOW TO...
Change Channel
Enter Monitor Mode
Enter Scan Mode
Send Call Tone (enabled
through CPS)
Quick Tip: It is not necessary to wait for the voice prompt to be completed before continuing with next button press.
Note: For single channel models, only Monitor mode is available from Menu list. To activate, press and hold the Menu button; to
deactivate, press and hold the Menu button again.
STEP 1
Press Menu button to navigate to Channel.
Press Menu button to navigate to Monitor.
Press Menu button to navigate to Scan.
Press Menu button to navigate to Call
Tone.
STEP 2
Press +/- button to change
channel.
Press +/- button to activate or
deactivate Monitor.
Press +/- button to activate or
deactivate Scan.
Press +/- button to send Call
Tone.
7