6881038B85.book Page 16 Thursday, August 30, 2001 3:07 PM
\ Changing your Radio's Menu Settings
Setting the Channel
•
Turn radio On.
•
Press
or
until you find a clear channel.
[
]
Set the channel by pressing
Note: The red indicator light below the antenna on the left front of the radio flashes
every second when the channel is in use.
To set Repeater Channels (T7200 only), please refer Setting Repeater
Channels found on page 28.
Setting the Interference Eliminator Code
The Interference Eliminator Code helps minimize interference by providing you with
a choice of code combinations.
•
Turn radio On.
•
To set, press
until the code number display begins to flash.
\
•
Then press
or
[
]
•
Press M to exit this menu.
Note: To hear everyone on your channel, select Interference Eliminator Code 0.
You can specify a different Interference Eliminator Code for each channel.
•
To set a channel and code combination, press
16
once.
\
to choose the code.
[
6
or
to select the channel.
]