Radio Overview; Operation Of Menu Settings - Motorola CLP Series Quick Reference

• Make sure that the cord is located where it will not be
stepped on, tripped over, or subjected to water, damage, or
stress.
For information on the battery and charging procedures, refer to
the "Batteries and Chargers" section of the user guide.

RADIO OVERVIEW

Power Battery
Button
Volume Control
(+/-)

OPERATION OF MENU SETTINGS

Press Menu button to navigate through the Menu settings. At
any time in Menu mode, press PTT button briefly or wait 3
seconds to exit the menu.
2
English
Accessory
Connector
Menu Button
Smart Status
Glow
Push-to-Talk
(PTT) Button
CHANGING CHANNEL
1. Press Menu button to navigate to Channel.
2. Press +/- button to change channel.
ENTERING MONITOR MODE
1. Press Menu button to navigate to Monitor.
2. Press +/- button to activate or deactivate Monitor.
ENTERING SCAN MODE
1. Press Menu button to navigate to Scan.
2. Press +/- button to activate or deactivate Scan.
Quick Tip: It is not necessary to wait for the voice prompt to be
completed before continuing with next button press.
ACCESSING AND SETTING UP OTHER FEATURES
Your dealer or system administrator may have customized your
radio for your specific needs. Check with your dealer or system
administrator if you need to access or setup other features such
as changing channel frequency and sub-codes, activating voice
scramble, LED pattern options and VOX settings.