Miele CM 6110 Operating Instructions Manual page 68

Problem solving guide
Problem
F73 or
Check the brew unit
Too much ground coffee
68
Possible cause and remedy
The brew unit cannot be positioned correctly.
 Switch the machine off with the On/Off  sensor.
 Remove and clean the brew unit (see "Cleaning
and care – Brew unit").
 Push the coffee ejector of the brew unit into the
correct position (see diagram).
 Do not fit the brew unit. Close the service door
and switch the machine on with the On/Off 
sensor.
This will initialise the brew unit motor and put it back
into the start position.
 When
Insert the brew unit
open the service door and put the brew unit back
in the machine. Then close the door.
There is too much ground coffee in the coffee chute.
If more than one level scoop of ground coffee is
added to the coffee chute, the brew unit cannot
process the coffee. The ground coffee will be directed
into the waste container and the fault message will
appear in the display.
 Switch the machine off with the On/Off  sensor.
 Remove and clean the brew unit (see "Cleaning
and care – Brew unit").
 Remove the ground coffee inside the coffee
machine, e.g. with a vacuum cleaner.
 Use the coffee spoon supplied to add ground
coffee to the ground coffee chute. Add only one
portion of ground coffee to the chute.
appears in the display,