Cleaning The Milk Pipework - Miele CM 6110 Operating Instructions Manual

Cleaning and care

Cleaning the milk pipework

The milk pipework must be cleaned at
least once a week. A message in the
display will prompt you when this needs
to be done.
 Confirm the message with OK.
When you confirm the message
with OK, the internal
milk pipework
counter for the cleaning interval will be
reset. You will not be reminded again.
There are two options for cleaning the
milk pipework:
– You can remove and dismantle the
central spout with its integrated
cappuccinatore and either wash it in
the dishwasher or by hand with hot
water, a little washing-up liquid and a
soft cloth.
– Or you can clean the milk pipework
using the
Clean milk pipework
maintenance programme together
with a cleaning agent for milk
pipework.
54
Cleaning the milk pipework using the
maintenance programme
We recommend using the Miele
cleaning agent for milk pipework for
cleaning the milk pipework. This has
been specially developed for use with
Miele coffee machines and prevents
subsequent damage.
Clean
The milk pipework cleaning agent is
available to order from Miele or via the
internet at www.miele-shop.com.
 Touch .
 Select
The cleaning process cannot be
cancelled once it has started. The
process has to be completed
through to the end.
 Select
OK.
The process will start.
 Follow the instructions in the display.
Place milk pipe in cleaning agent
in the display.
Making a cleaning solution:
 Dissolve the powder in a container
with 200 ml of lukewarm water. Stir
the solution with a spoon until it has
fully dissolved.
and touch OK.
Maintenance
Clean milk pipework
and touch
appears