ENGINE
29. Mark the upper jam nut and loosen the lower jam nut. Pull
the shift cable out of the mount.
Mark Upper
Jam Nut
NOTE: If the upper jam nut is moved, shift cable
adjustment
will
be
installation (see Chapter 2 "Shift Cable Inspection /
Adjustment").
30. Disconnect the transmission gear indicator switch harness.
Gear Switch
Connector
31. Disconnect the CPS harness.
3.20
Lower
Jam Nut
required
during
engine
CPS
Connector
32. Disconnect the stator / alternator harness.
Stator
Connector
33. Disconnect the transmission speed sensor harness.
34. Remove the castle nuts from both rear wheel hubs.
Speed Sensor
Connector
Castle Nut