Polaris 2010 Ranger RZR 800 EFI Manual page 267

When the clutch gear is unlocked the rear drive shafts are
dependent on the differential allowing tighter turns. When it's
locked it becomes a solid rear axle increasing traction.
Differential
Clutch Gear
Locked Mode
Axle Shaft
Unlocked Mode
IRS Axle
Axle Shaft
Gearcase Removal
1.
See "REAR DRIVE SHAFT" on page 7.26
2.
3.
Clutch Gear
Locked
Axle Shaft
Clutch Gear
4.
Unlocked
Axle Shaft
Drain the fluid from the rear gearcase and remove the rear
drive shafts from each side of the rear gearcase.
Remove the exhaust pipe and exhaust silencer to allow for
gearcase removal.
Silencer
Remove
Remove the (4) bolts retaining the rear rack cab frame to
the rear suspension plate. Remove the upper A-arm bolts,
lower rear A-arm bolts, and plate.
Suspension
Plate
Remove the (2) rear gearcase mount bracket fasteners and
mount bolt and remove bracket from vehicle.
FINAL DRIVE
Remove
Remove
7
Remove
Remove
7.41