Appendix 3 Set Push Video; A3.1 Prerequisite - Avtech DG1015 User Manual

APPENDIX 3 SET PUSH VIDEO

This DVR series supports instant event notifications to your iOS / Android mobile device with our self-developed
program, "EagleEyes", installed. When a man is detected by an external alarm device, the DVR will immediately
receive alarm signals and send to your iOS / Android mobile device.
Note: iOS and Android are the trademarks or registered trademarks of their respective holders.

A3.1 Prerequisite

Before setting this function, make sure you have checked the following:
 You have an iOS or Android mobile device with our self-developed program, "EagleEyes", installed. For details, please
refer to the previous chapter.
 An external alarm device is connected to the external I/O ports on the rear panel. Make sure a camera is also connected
to record for alarm occurrences. To know which video channel corresponds to which alarm pin, please refer to
"APPENDIX 2 PUSH VIDEO CONFIGURATION" at page 61.
 The event record function of your DVR is not disabled.
 The motion detection function of your DVR is not disabled.
 Your DVR is connected to Internet. For details, please refer to
www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
63
APPENDIX 3 SET PUSH VIDEO