Dell Precision M6500 Service Manual page 25

Back to Contents Page
I/O and IEEE 1394 Board
Dell Precision™ Workstation M6500 Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Right I/O Board
Replacing the Right I/O Board
Removing the Left I/O and IEEE 1394 Board
Replacing the Left I/O and IEEE 1394 Board
Removing the Right I/O Board
NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in Before Working Inside Your
2. Remove the battery.
3. Remove the access panel.
4. Remove the secondary hard
5. Remove the hinge cover.
6. Remove the keyboard.
7. Remove the display assembly.
8. Remove the palm rest.
9. Remove the four screws that secure the right I/O board to the chassis.
10. Lift the right I/O board up and away from the computer.
Replacing the Right I/O Board
To replace the right I/O board, perform the above steps in reverse order.
Removing the Left I/O and IEEE 1394 Board
NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in Before Working Inside Your
2. Remove the battery.
Computer.
drive.
Computer.