Fan Sink - HP ProDesk 480 G3 MT Maintenance And Service Manual

Fan sink

Description
Fan sink, standard
Fan sink, BFR/PVC free
WARNING!
cool before touching.
NOTE: System board appearance may vary.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Disconnect the fan cable from the system board connector labeled CPUFAN (1), and then loosen the four
captive Torx T15 screws (2) that secure the fan sink to the system board.
CAUTION:
downward forces on the processor.
4. Lift the fan sink from atop the processor.
CAUTION:
seat the heat sink on the processor.
56 Chapter 4 Removal and replacement procedures: Microtower
To reduce risk of personal injury from hot surfaces, allow the internal system components to
(Access panel on page
Remove fan sink retaining screws in diagonally opposite pairs (as in an X) to even the
Fan sink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly
(Preparation for disassembly on page
24).
23).