Rear Panel Components - HP ProDesk 480 G3 MT Maintenance And Service Manual

Rear panel components

1 Line-In Audio Connector (blue)
2 RJ-45 Network Connector
3 Serial Connector
4 PS/2 Mouse Connector (green)
5 Power Cord Connector
6 Line-Out Connector for powered audio devices
(green)
NOTE: An optional second serial port and an optional parallel port are available from HP.
If using a USB keyboard, HP recommends connecting the keyboard to one of the USB 2.0 ports with the wake from S4/S5
feature. The wake from S4/S5 feature is also supported on the PS/2 connectors if enabled in BIOS F10 Setup.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and the
integrated graphics on the system board may be used at the same time. However, for such a configuration, only the display
connected to the discrete graphics card will display POST messages.
The system board graphics can be disabled by changing settings in Computer Setup.
7 USB 3.0 Ports (blue)
8 USB 2.0 Ports (black)
9 USB 2.0 Ports with Wake from S4/S5
feature (black)
10 DisplayPort Monitor Connector
11 VGA Monitor Connector
12 PS/2 Keyboard Connector (purple)
ProDesk 400 3