Sata Hard Drives; Sata Hard Drive Cables; Sata Data Cable; Smart Ata Drives - HP ProDesk 480 G3 MT Maintenance And Service Manual

Business pc
Hide thumbs Also See for ProDesk 480 G3 MT:
Table of Contents

Advertisement

NOTE:
Batteries, battery packs, and accumulators should not be disposed of together with the general
household waste. In order to forward them to recycling or proper disposal, please use the public collection
system or return them to HP, their authorized partners, or their agents.

SATA hard drives

Serial ATA Hard Drive Characteristics
Number of pins/conductors in data cable
Number of pins in power cable
Maximum data cable length
Data interface voltage differential
Drive voltages
Jumpers for configuring drive
Data transfer rate

SATA hard drive cables

SATA data cable

Always use an HP approved SATA 6.0 Gb/s cable as it is fully backwards compatible with the SATA 1.5 Gb/s
drives.
Current HP desktop products ship with SATA 6.0 Gb/s hard drives.
SATA data cables are susceptible to damage if overflexed. Never crease a SATA data cable and never bend it
tighter than a 30 mm (1.18 in) radius.
The SATA data cable is a thin, 7-pin cable designed to transmit data for only a single drive.

SMART ATA drives

The Self Monitoring Analysis and Recording Technology (SMART) ATA drives for the HP Personal Computers
have built-in drive failure prediction that warns the user or network administrator of an impending failure or
crash of the hard drive. The SMART drive tracks fault prediction and failure indication parameters such as
reallocated sector count, spin retry count, and calibration retry count. If the drive determines that a failure is
imminent, it generates a fault alert.

Cable management

Always follow good cable management practices when working inside the computer.
Keep cables away from major heat sources like the heat sink.
Do not jam cables on top of expansion cards or memory modules. Printed circuit cards like these are not
designed to take excessive pressure on them.
Keep cables clear of sliding or moveable parts to prevent them from being cut or crimped when the parts
are moved.
When folding a flat ribbon cable, never fold to a sharp crease. Sharp creases may damage the wires.
7/7
15
39.37 in (100 cm)
400-700 mV
3.3 V, 5 V, 12 V
N/A
6.0 Gb/s
SATA hard drives
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prodesk 4000 g3 mtProdesk 490 g3 mt

Table of Contents