Table of Contents
Advertisement
Promi-SD User Manual – 2. Configurations
16
Select SD1 and click [ Connect], then the following message box will be shown.
It takes about 5 seconds to complete connection. SD1 and SD2 now have each other's BD address. Status (Promi -
SD101/202) or Standby (Promi-SD205) LED's of both SD1 and SD2 will be lit in green.
For the automatic connection between SD1 and SD2 when power off and on, operation mode of SD1 and SD2 have to
be set respectively.
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Advertisement
Table of Contents
