Serial Number Format; 110V Engine Format - Xerox Phaser 3610 Service Manual

Parts List

Serial Number Format

Changes to Xerox products are made to accommodate improved components as they become
available. It is important when ordering parts to include the following information:
• Component's part number
• Product type or model number
• Serial Number of the printer
The serial numbers are only reset to the starting serial number when the ending serial number is
reached. At that time the revision digit will be rolled. Serial numbers below 10001 are reserved for XOG
Final Integration Center (FIC) sites if re-serialization is needed.
Note: Not all of the serial number will be used. This is a buffer in case additional units are built by
Fuji Xerox for each model of printer during pre-production.

110V Engine Format

The nine-digit serial number has the following format:
• PPPSSSSSS
• PPP = Three digit alphanumeric product code
• SSSSSS = Six digit numeric serial number
Product
Pre-Production (PP)
xxxx_xx, 110V Engine
Mass Production (MP)
xxxx_xx, 110V Engine
* Not all of the serial numbers will be used. This is a buffer in case additional units are built by FX during pre-
production
* Serial numbers between xxxxxx - xxxxxx are reserved for XOG FIC sites if re-serialization is needed. A serial
number break or a new serial number range will be provided when a major product change occurs.
5-2 Phaser 3610, WorkCentre 3615 Service Manual
Table 1: 110V Engine Format
Product Code Starting Serial Number
xxx
xxx
Ending Serial Number
xxxxxx
xxxxxx
xxxxxx
xxxxxx