IOGear GCS1808 Installation Manual page 49

F8: LOUT
You can also trigger the autoscan by front panel
pushbutton or hotkey command. Press and hold
Port 7 and Port 8 pushbutton on the GCS1808
(Port 15 and Port 16 for GCS1716) to trigger
autoscan with default autoscan time interval. For
hotkey command, please refer to Hotkey Setting
Mode (HSM) section.
F8: LOUT
This function allows you to logout of the OSD. So,
when another person is trying to access this from
the console, he would have to login again. Simply
Press Y to proceed the logout and N to cancel.
49