IOGear GCS1808 Installation Manual page 47

F5: SKP
F5: SKP
This function allows you to trigger Skip Mode.
Simply press [F5] to activate skip mode. When
you see a left and right arrow next to the port
number as the image below, you can press the
arrow keys to skip to different ports. (Skip Mode's
behavior depends on the setup that you chose
in Scan-Skip Mode, please to F3 – SET for more
detail about Scan-Skip Mode)
Function Description
[←] Switch to the last accessible port
Switch to the next accessible port
[→]
[↑] Switch to the last accessible port*
Note: If you have cascaded your
KVM, it will switch to the last
accessible port from level 2 of the
last port from level 1.
Switch to the next accessible port*
[↓]
Note: If you have cascaded your
KVM, it will switch to the next
accessible port from level 2 of the
next port from level 1.
47