Changing The Battery; Remote Control Code - TechniSat TechniStar S2 Quick Start Manual

2.5 Important information on data security
Before handing your receiver over to your supplier for maintenance purposes, we
recommend that you remove all storage media or data carriers.
Restoring data is not part of maintenance or repair work. TechniSat accepts no responsibility
for the loss of, or damage to, data during repair work.
3 Remote control

3.1 Changing the battery

> Open the cover on the battery compartment at the rear of the remote control by
pushing it in the direction of the arrow and then lifting it off.
> Insert the supplied batteries, ensuring that the poles are the right way around (indicator
visible in battery compartment).
> Close the battery compartment again.

3.2 Remote control code

By switching over the remote control option it is possible to use this remote control to
operate a TechniSat television and two TechniSat receivers using the same coding.
> To switch over the remote control option, press the button you want (SAT1, SAT2 or
TV) and OK at the same time.
7