Transponder Information; Freeze Frame - TechniSat TechniStar S2 Quick Start Manual

> Use the up/down arrow buttons to highlight the language you want and confirm
with OK.
You can now hear the programme in the selected language.
It is also possible to receive mono broadcasts with your digital receiver.
> Using the right/left arrow keys you can choose between mono channel 1 (
mono channel 2 (
and the desired language highlighted.

7.8 Transponder information

> Use the OK button to call up the Navigator.
> Use the arrow keys to highlight the channel for which data you want to display dat .
> By pressing the yellow function button (Status), the data for the installed
transponder is displayed.

7.9 Freeze frame

> Press the Freeze frame key; the current TV picture will be displayed as a still
picture.
> Press this key again to return to normal operation.
The sound will continue to be reproduced normally during freeze frame.
7.10 Teletext
7.10.1 Using your TV's teletext decoder
Where broadcast, teletext is provided via your TV's Scartsocket.
7.10.2 Using the internal teletext decoder
As an alternative, you can use the integrated TOP teletext decoder to display the
information. With TOP teletext, all text pages are separated into groups and blocks by
subject, making the teletext display clearer.
> Switch on the channel from which you wish to view teletext data.
> Switch the teletext on by pressing the Teletext button.
) and stereo ( ) when the sound selection has been called up
27
),