Table of Contents
Advertisement
7.6
Returning to the previous channel
½ The button BACK on your remote control will switch to the station tuned in
previously.
½ On pressing the button again you will be returned to the station watched/listened
to before.
7.7
Display of time and programme information
This function will display the time and information about the tuned in programme.
½ Press INFORMATION to display the information on the screen.
In the lower part of the screen you will now see the current time, the station's name
and the name of the programme with the time of the beginning and end of the
broadcast. Provided that these information are submitted by the broadcaster.
7.8
Additional programme information
½ If supplied, you can receive additional information about the programme by
pressing the button PROGRAMME INFORMATION.
½ On pressing OK information about the following broadcast will be displayed.
½ If PROGRAMME INFORMATION is pressed again, the display will vanish.
7.9
Transponder information
½ On pressing the button TRANSPONDER INFORMATION the data of the
transmitting transponder will be displayed.
½ Press this button again to turn the display off.
7.10 Teletext
If supplied, the data of the teletext information can be replayed on the TV.
If there are disturbances like overlapping of teletext and picture, you should switch
your receiver to FBAS mode (see 5.2 Scart mode).
7.11 Timer operation
Your receiver is equipped with a timer function which enables you to record during
absence. Up to 8 events can be pre-programmed:
½ Call Main Menu with the MENU button.
½ Choose the menu line Timer by marking the corresponding line red with the help
of the cursor keys up/down.
½ Confirm with OK.
The sub-menu Timer appears.
The settings for the timer 1-8 are the same:
½ Select the field you want to change with the help of the cursor keys -/+ and
up/down.
---------------------------------------------------------------------------------------
23
Hide quick links:
Advertisement
Table of Contents
