Table of Contents
Advertisement
INSTALLATION
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER,
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER IF IN DOUBT DO NOT DO THIS CONVERSION!!
LPG Conversion Kit Contains:
Qty.
Part #
Description
1
904-390
Burner Orifi ce #52
1
904-529
5/32" Allen Key
1
918-590
Label "Converted to LP"
1
908-528
Red "LPG" label
1
910-037
#30 ULPG Pilot Orifi ce
1
918-577
Instruction Sheet
1)
Shut off the gas supply and unplug the
power cord.
2)
Carefully remove the glass, logs and
lava rock.
3)
Remove burner.
4)
Remove burner orifi ce with a 1/2"
wrench and discard. Use a wrench to
hold on to the elbow behind the orifi ce.
5)
Reinstall new burner orifi ce stamped #52
and tighten.
6)
Pull out the pilot hood by hand.
Pilot
Hood
20
918-577
Conversion Kit #513-968 from NG to LPG
Conversion From NG To LPG Kit #513-968
IF IN DOUBT DO NOT DO THIS CONVERSION !!
Pilot
Hood
removed
Pilot
Orifi ce
7)
Remove the pilot orifi ce with the allen
key.
8)
Put in the new LPG orifi ce with the allen
key. Then put back the pilot hood.
Burner Orifi ce
9)
10) Open the bottom louver.
11) Remove the front cover by undoing the 2
12) Stick the conversion label "This unit has
13) Replace the yellow "NG" label with the
14) Carefully pull out the control box from
Note: The control box is held in place with
1
PG36-4 / PG36D-2
Adjust the burner aeration setting to and
re-install the burner.
screws.
Front Cover
been converted to LPG" over top of the
serial number decal.
red "LPG" label.
underneath the fi rebox.
velcro.
Regency
PG36-5 Gas Log Fireplace
®
12/20/06
Advertisement
Table of Contents
